******************************** ECpv release text ******************************** ******************************** Version 1.00.0 - First release ******************************** New features: 1- Modbus TCP/IP & RTU Slave support. 2- Power meter support (DG, PV, Mains). 4- Inverter comm. support (SunSpec). 5- Sensor comm. support. 9- Counters support (energy, curtailment, consumption etc.). 10- Ratios support (performance & penetration). 11- Local logging on SD-card or USB support (Eventlog, Production & Summary). 12- Server support (FTP, WEB, Telnet). 13- NTP support. 14- Email client support. 15- FTP client support. 16- Status/alarm texts. 17- Password scheme. 18- Cloud logging to MySQL database. 19- Backups locally and in cloud (parameter and counters). ********************************* Version 1.01.0 - based on 1.00.0 ********************************* New features: 1- Modbus TCP/IP Slave (SunSpec interface) 2- Inverter comm. (SolarEdge) 3- Ind/Cap limitation to be enabled by parameter 4- NO/NC on relay "signal". 5- "Action" support added on selected alarms. 6- "Auto acknowledge" support added on selected alarms. 7- Cloning support by using backups from other unit. 8- Supervision alarms on Modbus Slave communication. 9- Network settings check. 10- Introduction of S and M extras. ********************************* Version 1.02.0 - based on 1.01.0 ********************************* 1- Device variant info added to "About" page. 2- Re-transmission attempts added to auto-mail and auto-FTP. ********************************* Version 1.02.1 - based on 1.02.0 ********************************* 1- Longitude/Latitude was not pusched to ECcloud as intended. 2- Unexpected sensor modbus frame could be generated. ********************************* Version 1.03.0 - based on 1.02.1 ********************************* 1- EClogic introduced. 2- Support of Delta/Solvia for Delta RPI inverter series. 3- Support of Huawei SUN2000-8-28KTL inverter series. 4- Support of Entes EMP-07S power meter. 5- Support of AMF20, AMF25 and Intelilite9 Comap genset controllers. 6- Support of relay outputs on genset and mains meters. 7- Read out of daily energy in inverter Ecweb page was a factor 10 off. ********************************* Version 1.03.1 - based on 1.03.0 ********************************* 1- Mail handling improved. ********************************* Version 1.03.2 - based on 1.03.1 ********************************* 1- Error-pct for bar-graph display all limited to [-100;100] range. Webvisu.html do not support "clipping" so bar indication would go beyond bar-chart itself. 2- When com2 initialized for sensor communication a power meter frame was always being generated even though no power meter enabled. 3- Display of bar-graphs on ECweb overview was all dependent on presents of DG meter. 4- For single inverter via TCP (same IP in Control and Acquisistion) an offset of "1" for IP address was used unintendently. ********************************* Version 1.03.3 - based on 1.03.2 ********************************* 1- Power slope setting now fixed to 1s in Delta/Solvia inverters from ECpv via interface. 2- Trigger of COM port initialization now made explicit on changes made for the specific port. This is to avoid both ports being initialized each time port SAVE is pushed. It makes changing one port not resulting in initialization of the other and vice versa. ***************************************************** Version 1.04.0 - based on Version 1.03.3 ***************************************************** New features: 1- Huawei SmartLogger support added. 2- Janitza UMG96RM supported added. 3- Support of energy readout for selected meters added. 4- A option for "Acquisition only" implemented. Control of inverters now need to be explicitly enabled by parameter. If option A is present this parameter is forced to off. Changes: 1- Watchdog now also consideres if low prio task is not running. 2- NTP auto sync now attempts three times before aborting and raising alarm. 3- MySQL update rate no longer fixed to 5min when using Cloud Service (C extra). Corrections: 1- "SunSpec incompatible" alarm was not clared when SunSpec protocol was disabled. 2- Very first frame to sensor was corrupt as sensor frame scheduler not initialized. 3- Sensor alarm was provoked when running on COM3 together with inverter and broadcast was selected. 4- POA value via PVCOMM was unintedently copied to BOM via PVCOMM. ***************************************************** Version 1.04.1 based on Version 1.04.0 ***************************************************** Corrections: 1- Correction made to meter data decoding. Some non-zero values only used for display purposes could be interpreted as zero. ***************************************************** Version 1.05.0 based on Version 1.04.1 ***************************************************** 1- Relay output support added to Janitza UMG96RM meter. 2- Number of inverters, power meters, sensors, installed kWp capacity etc. added to Modbus and data able to be pushed to MySQL. The data is furthermore included in the C-extra (ECcloud). 3- All inverter and meter data listed in Mysql documentation included in C-extra. 4- Exception handling added triggered by systemevents. ECpv restarted in case occuring. ***************************************************** Version 1.06.0 based on Version 1.05.0 ***************************************************** New features: 1- Backups can now be saved/loaded from USB stick. Changes: 1- Comap controllers made available as PV and mains meter selections also. Corrections: 1- Comap controller PF only provided with 2 decimals. 2- MB position via EC_LOGIC only worked in case associated Mains meter was enabled. 3- Mains color now black on overview in case ECLOGIC used for feedback, feedback is off and no meter enabled for sensing mains power. 4- Corrections to SolarEdge support. ***************************************************** Version 1.06.1 based on Version 1.06.0 ***************************************************** 1: Correction to Huawei SUN2000_8_28ktl support. 2: Exception handling improved. ***************************************************** Version 1.06.2 based on Version 1.06.1 ***************************************************** 1- MySQL buffer functionality re-established. ***************************************************** Version 1.06.3 based on Version 1.06.2 ***************************************************** 1- Corrections to counters file load. 2- Alarm acknowledge in line3 acknowledged the alarm in line1. 3- POA and BOM origin on settings overview page corrected. ***************************************************** Version 1.07.0 based on Version 1.06.3 ***************************************************** 1- Genset management scheme added. 2- Support of ABB TRIO added. 3- Support of Comap InteliGen and InteliSys added. 4- Usage of power read from Master controller as expression for PV power corected. 5- Janitza P,Q and S readings was a factor 1000 to high. ***************************************************** Version 1.08.0 based on Version 1.07.0 ***************************************************** 1- Support of Huawei SUN2000_50_75KTL added. 2- Support of Sungrow SG series added. 3- Interface to Modbus RTU inverters by Modbus TCP from ECpv via TCP-RTU converter support added. 4- Q control with Delta Solvia support added. ***************************************************** Version 1.08.1 based on Version 1.08.0 ***************************************************** 1- Correction to Sungrow SG data acqusition. 2- Correction related to usage of webvisu.html. ***************************************************** Version 1.09.0 based on Version 1.08.1 ***************************************************** 1- Possibility of basing the PV, Genset and Grid energy counters on direct from energy meters added. 2- Possibilty of using 3 x least loaded phase for reference base added. 3- P(f) grid support added. 4- Q(U) grid support added. 5- MB feedback origin selection "All GB Off" added. 6- Propreitary modbus 0x03 map for control references and schemes added. 7- Keeping a fixed cosphi on genset support added. 8- Deif MIC-2 support added. 9- Schneider EM64XX/PM1200 support added. 10- Huawei SUN2000_33_42KTL Support added. 11- Energy now included in data read from iem3200 meter. 12- Energy now included in data read from AccuvimL meter. 13- Correction to Caterpillar EMCP4 support. 14- Correction to Huawei Smartlogger support. 15- Correction to SE iem3200 support. 16- Correction to SE pm5xxx support. 17- Correction to ABB TRIO support. ***************************************************** Version 1.10.0 based on Version 1.09.0 ***************************************************** 1- Possibilty of using 3 x load sensings for reference base added. 2- Support of Schneider Conext CL60. ***************************************************** Version 1.11.0 ***************************************************** New features: 1- SMA SolidQ support added. 2- RTC clock read out in Modbus. 3- Various settings read out in Modbus. 4- Genset Management start command support via Modbus Modbus. 5- Ack. all alarms command support via Modbus Modbus. 6- Welcome page added. 7- Front page layout changed. ***************************************************** Version 1.11.1 ***************************************************** 1- P/Q array for Meter data not updated correctly when rading via TCP. 2- IP address shown for Meter data not updated correctly when rading via TCP. ***************************************************** Version 1.12.0 ***************************************************** 1- Various Modbus updates for support of ECpanel version 1.00.0. ***************************************************** Version 1.13.0 ***************************************************** New features: 1- Progress bar displayed when saving backups. 2- Comap Inteli Compact supported added. 3- Woodward EasyGen2000 supported added. 4- Woodward EasyGen3000 supported added. ***************************************************** Version 1.14.0 ***************************************************** New features: 1- Support of Klemsan Ercas, Krea & Powys meters. 2- Growatt support added. 3- SunSpec P/Q control enables can now be configured to be disabled, transmitted at a defined interval or be transmitted continuously. 4- Comap AMF20/25 and IL9 can now be used as external power meter for genset sensing in the same way as they already could for grid and PV sensing. 5- Input status was hidden for PV meters. ***************************************************** Version 1.15.0 ***************************************************** 1- Support of Sofar inverters added. 2- ECpv added as power meter selection enabling the reading of power meter data via another ECpv. 3- SunSpec fallback timeouts can now be configured to be disabled, transmitted at a defined interval or be transmitted continuously. ***************************************************** Version 1.16.0 ***************************************************** 1- Possibility of license and extras activation via USB stick added. ***************************************************** Version 1.17.0 ***************************************************** New features: 1- Support of Phoenix EEM_EM3XX power meters. 2- Support of Phoenix EMPro power meter. ***************************************************** Version 1.17.1 ***************************************************** New features: 1- Modbus TCP server corrected. ***************************************************** Version 1.17.2 ***************************************************** 1- Digital input status on Phoenix EEM3-EM3XX power meter was not displayed on ECweb. ***************************************************** Version 1.17.3 ***************************************************** 1- Correction to inverter data acquisition handling via SunSpec. ***************************************************** Version 1.17.4 ***************************************************** 1- Cabinet temperature was displayed a factor 10 to low when using SunSpec protocol. ***************************************************** Version 1.18.0 ***************************************************** 1- Proprietary modbus page 03 support added. 2- Initializtion inverter ID support added. 3- Correction to inverter data acquisition handling via SunSpec. 4- Meter missing alarm handling improved when running "ENcombi ECpv" as meter type. ***************************************************** Version 1.18.1 ***************************************************** Changes: 1- Huawei protocol selections texts changed to V2.0 and V3.0. 2- P/Q inverter list page now presents "N.A" for each individual inverter 3- Sensor button in monitoring was only active in case POA or BOM enabled. 4- When MB origin was set to "ALL GB OFF", then the total Mains P og Q was not aggregated. ***************************************************** Version 1.18.2 ***************************************************** 1- COM port initialization (baudrate etc.) for Modbus Master functionality improved. ***************************************************** Version 1.19.0 ***************************************************** 1- Simulation feature added. 2- Curtailed power added to Modbus. ***************************************************** Version 1.19.1 ***************************************************** 1- POA/BOM now impact PV plant power capacity in simulation mode. ***************************************************** Version 1.19.2 ***************************************************** 1- Genset management run commands coupled to GB on in simulation mode. ***************************************************** Version 1.20.0 based on Version 1.19.2 ***************************************************** 1- Mail service added. 2- Dayly event logs instead of one single event log file. 3- Event logs shared with ECcloud when ECcloud service enabled. 4- Nbr of WEB connections selection removed and fixed to "10". 5- Sensor data was not displayed in ECcloud when ECpv in Simulation mode. ***************************************************** Version 1.21.0 based on Version 1.20.0 ***************************************************** 1- Eastron SDM630MCT support added. ***************************************************** Version 1.22.0 based on Version 1.21.0 ***************************************************** 1- Schneider PM2XXX support added. 2- Update made to Janitza UMG96RM support. 3- Update made to usage of energy counters via meters. ***************************************************** Version 1.22.1 based on Version 1.22.0 ***************************************************** 1- Load menu removed removed. 2- Event mail log text updated. 3- Eventlog attachment to event mail handling when updated. ***************************************************** Version 1.23.0 based on Version 1.22.1 ***************************************************** 1- Cosphi control added to the RRCR feature. 2- SmartGen HGM400 support added. 3- Growatt MAX-series support added. 4- SevenSolar sensor support added. 5- Night time setup added. 6- PV active power vs reactive power priority selection expanded with option of prioritizing active power during day time and reactive power during night time. 7- Breaker button handling under stimuli page improved. ***************************************************** Version 1.23.1 based on Version 1.23.0 ***************************************************** 1- SE conextCL start/stop commands corrected. 2- Cummins PCC address indexing corrected. 3- Modbus page03 now disabled per default. ***************************************************** Version 1.24.0 based on Version 1.23.1 ***************************************************** 1- Ginlong Solis inverter Support. 2- Polycab inverter Support. 3- ABB TRIO 50_60 inverter Support. 4- Control of multiple inverters using unicast on RTU support. 5- Use of new colored icons. ***************************************************** Version 1.25.0 based on Version 1.24.0 ***************************************************** 1- KStar inverter support. 2- "All Q - no limits" added as option for genset Q control. ***************************************************** Version 1.25.1 based on Version 1.25.0 ***************************************************** 1- Correction made to the ABB trio 50-60 support. ***************************************************** Version 1.26.0 based on Version 1.25.1 ***************************************************** 1- Support of Socomec Diris A40. 2- Correction made to Acuvim L support. ***************************************************** Version 1.27.0 based on Version 1.26.0 Includes Service Tool version 1.00.0 ***************************************************** 1- Support of Service tool. 2- Modbus Tester feature added (in Service Tool) ***************************************************** Version 1.27.1 based on Version 1.27.0 ***************************************************** 1- Update to Phoenix EMpro support. ***************************************************** Version 1.27.2 based on Version 1.27.1 ***************************************************** 1- Update to Schneider PM55XX, PM53XX, PM51XX, PM2XXX and IEM3000. ***************************************************** Version 1.28.0 based on Version 1.27.2 ***************************************************** 1- Support of Chint DTSU/DSSU 666. ***************************************************** Version 1.28.1 based on Version 1.28.0 ***************************************************** 1- Update to Chint support. 2- Update to Sungrow support. ***************************************************** Version 1.29.0 based on Version 1.28.1 Includes Service Tool version 1.01.0 ***************************************************** 1- Configuration support of Pilot SPM32 & SPM33 (Service tool). ***************************************************** Version 1.30.0 based on Version 1.29.0 ***************************************************** 1- Support of Kehua SPI-B inverter series. 2- Control of the Power meter relay outputs via the ECpv TCP Modbus server / Modbus RTU Slave ports. 3- IO support added to Phonix MEE MA770 (EMPro). 4- Relay control handling for power meters via Modbus TCP improved. ***************************************************** Version 1.40.0 based on Version 1.30.0 ***************************************************** 1- Support of Lovato SGK60. ***************************************************** Version 1.41.0 based on Version 1.40.0 ***************************************************** 1- Support of IO modules. 2- Sensor setup and data visualization moved out of the PV setup and visualization. ************************************************ Version 1.42.0 based on Version 1.41.0 ************************************************ 1- Support of Sungrow PC-4 Meteo station via Sungrow inverter protocol. 2- ECpv added as Sensor selection so one ECpv can read sensor data from another. ************************************************ Version 1.42.1 based on Version 1.42.0 ************************************************ 1- MySQL handling improved. ***************************************************** Version 1.43.0 based on Version 1.42.1 ***************************************************** 1- Support of Secure Elite 440 added. 2- Support of Secure ABB M4M 30 added. ***************************************************** Version 1.43.1 based on Version 1.43.0 ***************************************************** 1- Update made to the Secure Elite 440 support. ***************************************************** Version 1.44.0 based on Version 1.43.1 ***************************************************** 1- HMS HW support. ***************************************************** Version 1.45.0 based on Version 1.44.0 ***************************************************** 1- PV available energy counters readout added. 2- Performance ratio calculation updated. ***************************************************** Version 1.45.1 based on Version 1.45.0 ***************************************************** 1- Updates to meteo data readout from Smartlogger. ***************************************************** Version 1.46.0 based on Version 1.45.1 ***************************************************** 1- Ramp rates added to Modbus additions. 2- Genset rated powers added to Modbus. 3- Rated inverter powers added to Modbus. 4- PV available power added to Summary log. ***************************************************** Version 1.46.1 based on Version 1.46.0 ***************************************************** 1- Modbus IDs for power meters can now go up to 255. 2- Panel capacity no longer limited by S and M options. ***************************************************** Version 1.46.2 based on Version 1.46.1 ***************************************************** 1- Updates made to SMA SolidQ. ***************************************************** Version 1.46.3 based on Version 1.46.2 ***************************************************** 1- Updates made to Schneider meter support. ***************************************************** Version 1.47.0 based on Version 1.46.3 ***************************************************** 1- Mains kW origin expanded to include "PC COMM." selection. 2- P/Q grid readings via Huawei Smartlogger communication added. 3- P/Q grid readings via SolarEdge communication added. ***************************************************** Version 1.48.0 based on Version 1.47.0 ***************************************************** 1- Support of SMA Webbox STP nn000TL-10 added. ***************************************************** Version 1.49.0 based on Version 1.48.0 ***************************************************** 1- Support of meteo data from SMA sensorbox and SMA meteo station via SMA Webbox added. ***************************************************** Version 1.49.1 based on Version 1.49.0 ***************************************************** 1- Updates made for the SMA Webbox support. ***************************************************** Version 1.49.2 based on Version 1.49.1 ***************************************************** 1- Updates made for SolarEdge Wattnode support. ***************************************************** Version 1.49.3 based on Version 1.49.2 ***************************************************** 1- Updates made for Modbus RTU Slave. 2- Updates made for SMA Webbox support. 3- Updates made for SunSpec inverter data acquisition. ***************************************************** Version 1.50.0 based on Version 1.49.3 ***************************************************** 1- Support of Goodwe DT series. 2- Support of Goodwe MT series. 3- Energy counters are now read from Phoenix EMPro. ***************************************************** Version 1.51.0 based on Version 1.50.0 ***************************************************** New features: 1- Update made for SunSpec support. ***************************************************** Version 1.51.1 based on Version 1.51.0 ***************************************************** 1- Updates made to the Goodwe DT/MT support. ***************************************************** Version 1.52.0 based on Version 1.51.1 ***************************************************** 1- Modbus Page03 is added to Meteorological Origin. ***************************************************** Version 1.53.0 based on Version 1.52.0 ***************************************************** 1- GB Power detection threshold level added. 2- Secure Elite 300 support added. 3- ECcloud Trial expiration notification. 4- MySQL query optimization. ***************************************************** Version 1.54.0 based on Version 1.53.0 ***************************************************** 1- Modbus page 05 seletion added for enabling superior control via DNP3. ***************************************************** Version 1.55.0 based on Version 1.54.0 ***************************************************** 1- IO Modules is able to communicate by modbus TCP. 2- ECpv is now possible to select for IO modules. 3- Aldogue UPM209 Power meter protocol added. ***************************************************** Version 1.55.1 based on Version 1.55.0 ***************************************************** 1- Update to DNP3 support. ***************************************************** Version 1.55.2 based on Version 1.55.1 ***************************************************** 1- Update to SevenSensor. ***************************************************** Version 1.55.3 based on Version 1.55.2 ***************************************************** 1- Update made to Aldogue UPM209 power meter. ***************************************************** Version 1.55.4 based on Version 1.55.3 ***************************************************** 1- Updates made to modbus communication timeout handling. ***************************************************** Version 1.55.5 based on Version 1.55.4 ***************************************************** 1- Updates made to modbus communication timeout handling. ***************************************************** Version 1.56.0 based on Version 1.55.5 ***************************************************** 1- Boot loader application added to support update of SW via USB. ***************************************************** Version 1.57.0 based on Version 1.56.0 ***************************************************** 1- ECcloud data buffer handling updated. ***************************************************** Version 1.57.1 based on Version 1.57.0 ***************************************************** 1- Sungrow inverter was not updating data correct. ***************************************************** Version 1.58.0 based on Version 1.57.1 ***************************************************** 1- Spinning Reserve handling for synchronizing genset plants added. ***************************************************** Version 1.59.0 based on Version 1.58.0 ***************************************************** 1- Maximum dispatch limitation settings added. 2- inverter efficiency added for PV generating capacity calculation. 3- SunSpec and Propreitary modbus slave put into common modbus slave setup menu under Settings setup. ***************************************************** Version 1.60.0 based on Version 1.59.0 ***************************************************** 1- Setting for enable display of ECpanel password on ECpanel in clear text added. ECpanel version 1.07.0 comes with one level password support. ***************************************************** Version 1.60.1 based on Version 1.60.0 ***************************************************** 1- Some PV related settings (ramps etc.) was not saved when edited via ECweb. ***************************************************** Version 1.61.0 based on Version 1.60.1 ***************************************************** 1- Mouse over texts added to EClogic. 2- DSE GenComm for grid readings added. ***************************************************** Version 1.62.0 based on Version 1.61.0 ***************************************************** 1- Initial ramp threshold handling added. 2- Update made to "3 x Lowest phase" sensing for parallel to grid operation. ***************************************************** Version 1.62.1 based on Version 1.62.0 ***************************************************** 1- Various texts was corrupted for Webvisu.html connection. ***************************************************** Version 1.62.2 based on Version 1.62.1 ***************************************************** 1- Condition for digital input frame from mains power meter corrected. ***************************************************** Version 1.63.0 based on Version 1.62.2 ***************************************************** 1- AISWEI inverter support added. 2- RainWise PVmet-100-2 weather station support added. 3- Pilot PMAC770 support added. 4- Smartgen HGM7X00 and HGM9X00 support added. 5- Support of TCP/RTU converter for power merter interfacing. ***************************************************** Version 1.63.1 based on Version 1.63.0 ***************************************************** 1- Update made to the initial ramp handling. ***************************************************** Version 1.63.2 based on Version 1.63.1 ***************************************************** 1- Update made to Value Overflow. ***************************************************** Version 1.64.0 based on Version 1.63.2 ***************************************************** 1- Circutor CVM C4 support added. 2- Update made to AccuvimL support. 3- Update made to Chint support. ***************************************************** Version 1.64.1 based on Version 1.64.0 ***************************************************** 1- Update made to Chint support. ***************************************************** Version 1.64.2 based on Version 1.64.1 ***************************************************** 1- Update made in the Sungrow support. 2- Update made to bargraph P and Q loading handling on the monitoring page. ***************************************************** Version 1.65.0 based on Version 1.64.2 ***************************************************** 1- Secondary inverter supported added. 2- Update made to Acuvim support. ***************************************************** 1.66.0 based on Version 1.65.0 ***************************************************** 1- Support of Goodwe HT added. 2- Update made to the Circutor support. ***************************************************** 1.67.0 based on Version 1.66.0 ***************************************************** 1- Support of GC310/350/500 Sices genset controllers. ***************************************************** 1.68.0 based on Version 1.67.0 ***************************************************** 1- Support of MC100 Sices power meter. 2- Update made to GC310/350/500 Sices genset controllers. ***************************************************** Version 1.69.0 based on Version 1.68.0 ***************************************************** 1- Huawei Smartlogger added as an option for grid meter protocol selection. ***************************************************** Version 1.69.1 based on Version 1.69.0 ***************************************************** 1- Sensor handling updated. ***************************************************** Version 1.70.0 based on Version 1.69.1 ***************************************************** 1- Support of using sequential Modbus IDs in TCP frames for power meters added. ***************************************************** Version 1.70.1 based on Version 1.70.0 ***************************************************** 1- Update made to Goodwe HT the support. ***************************************************** Version 1.71.0 based on Version 1.70.1 ***************************************************** 1- INVT support added. 2- Huawei smartlogger IO support added 3- Secondary inverter protocol control added. ***************************************************** Version 1.71.1 based on Version 1.71.0 ***************************************************** 1- Update made to the ABB M4M-30 support. ***************************************************** Version 1.71.2 based on Version 1.71.1 ***************************************************** 1- Update made to the ABB M4M-30 support. ***************************************************** Version 1.72.0 based on Version 1.71.2 ***************************************************** 1- Elgris Smartmeter support added. ***************************************************** Version 1.73.0 based on Version 1.72.0 ***************************************************** 1- Configurable Modbus area added. 2- Sum of Genset and Grid power and reactive power added to Modbus. 3- Update made for Elgris smartmeter. ***************************************************** Version 1.73.1 based on Version 1.73.0 ***************************************************** 1- Modbus proprietary page 5 and 6 enable/disable was not saved in settings backup. 2- Load depend start will use start target all time when grid has being connected and disconnected. ***************************************************** 1.73.2 based on Version 1.73.1 ***************************************************** 1- Update made to automatically scheduled NTP. ***************************************************** 1.74.0 based on Version 1.73.2 ***************************************************** 1- Carlo Gavazzi power meter added 2- DEIF ML2 btb position added as IO module 3- Hide of IO readings was incorrect when selecting huawei smartlogger ***************************************************** Version 1.75.0 based on Version 1.74.0 ***************************************************** 1- DSE8680 btb position added as IO module 2- Further update made to automatically scheduled NTP. ***************************************************** Version 1.76.0 based on Version 1.75.0 ***************************************************** 1- Soluzione Solare LiteMeter Pro support. ***************************************************** Version 1.77.0 based on Version 1.76.0 ***************************************************** 1- Support of Woodward Easygen3000XT genset controller. ***************************************************** Version 1.77.1 based on Version 1.77.0 ***************************************************** 1- Update of Woodward Easygen3000XT genset controller. ***************************************************** Version 1.78.0 based on Version 1.77.1 ***************************************************** 1- Support of Hukseflux SR05 added. ***************************************************** Version 1.79.0 based on Version 1.78.0 ***************************************************** 1- Huawei Smartlogger added as an option for genset meter protocol selection. ***************************************************** Version 1.80.0 based on Version 1.79.0 ***************************************************** 1- Support of Soluzione Solare Sunmeter Pro added. 2- Updates made for the Litemeter pro support. 3- Updates made for the Goodwe MT inverter support. ***************************************************** Version 1.80.1 based on Version 1.80.0 ***************************************************** 1- Update made to the Phoenix EMPro support. ***************************************************** Version 1.80.2 based on Version 1.80.1 ***************************************************** 1- Update made to the Accuvim EV300 handling. ***************************************************** Version 1.81.0 based on Version 1.80.2 ***************************************************** New features: 1- Support of Soluzione Solare Envmeter PRO added. 2- Support of Kippzonen SMP-series added. 3- Support of Sungrow COM100E (Logger1000 & Logger3000). 4- Update made to Sunmeter Pro 5- Update made to Litemeter Pro 6- Update made to Goodwe DT and MT series. ***************************************************** Version 1.81.1 based on Version 1.81.0 ***************************************************** 1- RRCR given priority over DNP3. 2- Update made to the Huawei Smartlogger handling. ***************************************************** Version 1.81.2 based on Version 1.81.1 ***************************************************** 1- Updated addresses for Sungrow COM100E ***************************************************** Version 1.81.3 based on Version 1.81.2 ***************************************************** 1- Q was inverted on Sungrow COM100E ***************************************************** Version 1.81.4 based on Version 1.81.3 ***************************************************** 1- Update made to the PV cosphi limits handling. ***************************************************** Version 1.82.0 based on Version 1.81.4 ***************************************************** 1- Support of Woodward LS-5 as IO module. 2- Common Modbus Master communication alarm added. ***************************************************** Version 1.83.0 based on Version 1.82.0 ***************************************************** 1- Soluzione Solare configurator added (service tool). 2- The Modbus Tester is updated to support device scanner function (service tool). ***************************************************** Version 1.84.0 based on Version 1.83.0 ***************************************************** 1- Support of Lettel MCT4. 2- Support of Siemens PAC3120. 3- Update made to the handling of Energy counters origin being power meters counters. ************************************************ Version 1.84.1 based on Version 1.84.0 ************************************************ 1- Upgraded to use Service tool version 1.04.1 ***************************************************** Version 1.85.0 based on Version 1.84.1 ***************************************************** 1- Support of Acuvim_II added. ***************************************************** Version 1.85.1 based on Version 1.85.0 ***************************************************** 1- Update of Siemens PAC3120. ***************************************************** Version 1.86.0 based on Version 1.85.1 ***************************************************** 1- Support of new backend. ***************************************************** Version 1.87.0 based on Version 1.86.0 ***************************************************** 1- Update of boot and service tool. ***************************************************** Version 1.87.1 based on Version 1.87.0 ***************************************************** 1- Config read fail could be provoked unexpectedly. ***************************************************** Version 1.87.2 based on Version 1.87.1 ***************************************************** 1- Cummins PCC handling updated. ***************************************************** Version 1.87.3 based on version 1.87.2 ***************************************************** 1- "Save to flash" handling added for Soluzione Solare sensor configuration (Service Tool). ***************************************************** Version 1.87.4 based on version 1.87.3 ***************************************************** 1- Update made to the Accuvim L support. ***************************************************** Version 1.87.5 based on version 1.87.4 ***************************************************** 1- Update of SPM32/SPM33 meter handling in case of presence of PTs. ******************************** Version 1.88.0 based on version 1.87.5 ******************************** 1- Sensitivity handling of Modbus Master alarms added. ***************************************************** Version 1.88.1 based on version 1.88.0 ***************************************************** 1- Modbus TCP on Power meter and IO communication updated. 2- Modbus Master sensitivity scheme for superior loggers like Smartlogger and COM100E updated. ***************************************************** Version 1.88.2 based on version 1.88.1 ***************************************************** 1- SunSpec handling updated. ***************************************************** Version 1.88.3 based on version 1.88.2 ***************************************************** 1- PV generating capacity is now set to 0kW in case it is night time and the generating capacity method is set to OFF. ***************************************************** Version 1.88.4 based on version 1.88.3 ***************************************************** 1- Modbus Slave handling updated. ***************************************************** Version 1.88.5 based on version 1.88.4 ***************************************************** 1- Update made to the Carlo Gavazzi EM300 handling. ***************************************************** Version 1.88.6 based on version 1.88.5 ***************************************************** 1- Changes made to the DNP3 mapping. ***************************************************** Version 1.88.7 based on version 1.88.6 ***************************************************** 1- Minor changes made to Huawei Smartlogger and AccuvimII power meter protocols.